2019 Renault Scenic — MOT failures & pass rate

The 2019 Renault Scenic passed 88.7% of its 1,319 recorded MOT tests. That is effectively the same as MPVs of a similar age (11.5% fail rate), so the MOT record here is unremarkable in either direction. Failures cluster in tyres, lighting & signalling and suspension.

89%
Pass rate
1,319
MOT tests analysed
11.3%
Fail rate
in line with
vs MPVs of similar age
4.5
Avg age at test (yrs)

What the MOT record shows

No single area dominates — tyres (5.2%) and lighting & signalling (4.9%) are close, so failures are spread across several systems rather than one weak point.

At component level the recurring items are headlamp aim, headlamp and brake pads — headlamp aim alone was recorded 28 times.

Mileage is the strongest signal on the record: 10.1% of 0-30k cars fail, rising to 25.0% once past 60-90k — 2.5× the risk.

Tyres is the most common advisory, noted on 24.4% of tests — work that passed today but is likely due soon.

The trend is worsening — 10.9% of tests failed in 2022 against 13.7% in 2025, the usual pattern as a fleet ages.

How it compares

Fail rate vs benchmarks (lower is better) 2019 Scenic 11.3% MPVs avg 11.5% National avg 10.1%
Fail rate for this model-year against the segment and national averages for cars of a similar age.

Top failure categories

Most common MOT failure areas — 2019 Renault Scenic
# Category % of tests affected Tests
1 Tyres 5.2% 69
2 Lighting & signalling 4.9% 65
3 Suspension 2.9% 38
4 Brakes 1.9% 25
5 Visibility 0.9% 12
6 Emissions & environmental 0.7% 9
Share of tests failing on each category Tyres 5.2% Lighting & signalling 4.9% Suspension 2.9% Brakes 1.9% Visibility 0.9% Emissions & environmental 0.7%
Percentage of tests with at least one failure recorded in each category.

Most common specific failures

The exact components most often recorded as failures — more specific than the categories above.

Most frequently recorded failure items — 2019 Renault Scenic
#Failure itemTimes recorded
1Headlamp aim28
2Headlamp20
3Brake pads19
4Linkage ball joints18
5Stop lamp11
6Tread depth11

Top advisory categories

Advisories aren't failures, but they flag work likely needed soon — useful when budgeting.

Most common MOT advisories — 2019 Renault Scenic
# Category % of tests with advisory Tests
1 Tyres 24.4% 322
2 Brakes 9.3% 123
3 Other defects 5.6% 74
4 Suspension 5.2% 68
5 Road wheels 1.8% 24
6 Visibility 0.9% 12

Failure rate by mileage

Higher-mileage cars tend to fail more — often the most useful guide to real condition.

MOT fail rate by recorded mileage 0-30k 10.1% 30-60k 12.3% 60-90k 25.0%
MOT fail rate by recorded mileage band.
Fail rate by recorded mileage — 2019 Scenic
Mileage band Tests Fail rate
0-30k 863 10.1%
30-60k 400 12.3%
60-90k 52 25.0%

Failure rate by age

MOT fail rate by vehicle age at test 3 yrs 10.9% 4 yrs 8.9% 5 yrs 11.8% 6 yrs 13.7%
How this model-year's MOT fail rate climbs as the cars get older.

By fuel type

Fail rate by fuel type — 2019 Scenic
Fuel Tests Fail rate
Petrol 1,108 11.4%
Diesel 211 10.9%

Trend over time

Fail rate by dataset year — 2019 Scenic
Dataset year Tests Fail rate
2022 330 10.9%
2023 324 8.9%
2024 321 11.8%
2025 329 13.7%

What to check before buying a 2019 Scenic

The failure pattern for this year is specific enough to inspect against: tyres accounted for 5.2% of tests. Start there.

Repair costs are rough UK ballpark ranges to set expectations, not quotes — actual prices vary widely by car, parts and garage.

Frequently asked questions

How many 2019 Renault Scenics pass their MOT?

88.7% of the 1,319 2019 Renault Scenic MOT tests in this dataset passed — a 11.3% fail rate.

What is the most common MOT failure on a 2019 Renault Scenic?

Tyres, recorded in 5.2% of tests, followed by lighting & signalling (4.9%).

Does the 2019 Scenic get worse with mileage?

Its MOT fail rate rises from 10.1% in the 0-30k band to 25.0% in the 60-90k band.

Methodology & source. Based on 1,319 MOT tests. Dataset: DVSA MOT testing data (2021,2022,2023,2024,2025). Data last updated 2026-07-27. Figures reflect MOT-testable defects only — read the methodology for how these are calculated and what they don't measure.

Related data